Replacing a lampshade? Five things to check before you order
A new lampshade can completely change the character of a favourite lamp. Before you fall in love with a fabric or shape, though, it helps to check a few details about the shade you are replacing. Two shades can look almost identical from the outside and fit very differently underneath.
These five simple checks will help you choose with confidence—and avoid ordering an extra fitting you may already have.
1. Measure the shade—and think about its shape
Start with the bottom diameter, top diameter and vertical height of your existing shade. Measure the height straight down, rather than along the sloping side. For a rectangular shade, note the top and bottom length and width as well.
If you like the proportions of your current shade, these measurements give you a useful starting point. If you are changing from a tapered Empire or Coolie to a straight-sided Drum, remember that the same bottom diameter can create a noticeably different look.
2. Look inside at the fitting
Turn your attention to the metal ring and framework inside the shade. Does it attach directly to the lampholder, rest on a separate carrier, or sit on a harp secured by a finial at the top? A photograph of the inside is often more useful than the fitting’s name.

Our Empire and Coolie shades have a duplex top ring. Our Drum shades use a utility fitting. Existing shades may have fixed or reversible gimbals or other arrangements, so do check before assuming a replacement will fit in the same way.
For a harp-and-finial lamp, please contact us before ordering. We can discuss a suitable shade with a top utility ring and reducing washers, then quote and arrange the order manually.

3. Check whether you already have the support you need
An Empire or Coolie shade on a table or floor lamp normally rests on a separate shade carrier. That carrier may stay on your lamp when you lift off the old shade—and you may be able to reuse it if its size and height are suitable.
For a ceiling pendant, a duplex shade needs a spider adaptor instead. A Drum shade normally attaches directly to a compatible lampholder, so a separate carrier is not usually needed. Tell us whether the shade is for a ceiling pendant or a table or floor lamp when ordering.
Our Drum shades, shade carriers and spider adaptors include a removable reducer ring for B22 or E27 lampholders. Leave it fitted for B22; remove it for E27. Other or unusual fittings are best checked with us first.
4. Check where the new shade will sit
The fitting affects the finished position of the shade as well as whether it attaches. On a table or floor lamp, our Drum shades have a fixed bottom utility ring: their height on the lamp cannot be adjusted with a carrier.
With an Empire or Coolie shade, the carrier height determines where the shade sits. For a harp-and-finial lamp, the harp height and shade height both matter. Check how much of the lamp neck and bulb you want concealed, and whether you would like the replacement to sit at the same height as the original.
5. Send Lucy & Chris a photo if anything is unclear
You do not need to become an expert in lampshade fittings before getting in touch. Send us a clear photograph of the whole lamp, the inside of the existing shade and the lampholder or support, together with your shade measurements.
If your old shade uses a gimbal or another unusual fitting, we may be able to assess the original frame for recovering. We do not supply gimbal fittings as standard; reusing a suitable frame can be a sensible option, and a bespoke replacement may be possible at additional cost.
Email Lucy & Chris at hello@thirtythreeinteriors.co.uk and we’ll help you work out the next step.
Want to compare the fittings side by side?
Our full Lampshade Fittings Guide brings together the diagrams, advice on carriers and spider adaptors, B22/E27 information and a simple fitting selector.
Explore our handmade lampshades and lampshade fittings and accessories when you are ready to compare the options.

Comments