How to choose a lampshade size and shape
To choose a lampshade size, start with the base, the space around it and the shape you want. Measure an existing shade if you like its proportions, then check the fitting and whether the shade is for a table lamp, floor lamp or ceiling pendant.
What should I measure?
For a round shade, note the bottom diameter, top diameter and vertical height. Measure straight down for the height, rather than along a sloping side. For a rectangular shade, record the top and bottom width and depth as well as the height.
If you are starting with a bare base, measure its height and widest point. Take a photograph from the side and note where the lamp will sit. A narrow bedside table, a broad console and a floor position can call for different proportions, even with a similar base.
How do the shapes change the look?
A drum has straight sides and a consistent top and bottom diameter. An empire narrows towards the top. A coolie has a wider, more pronounced taper, while a rectangular shade has a footprint that can work well on a console or against a wall. The same bottom width will not make these shapes look the same.
A larger shade can make a stronger statement, but check its widest point against the furniture, neighbouring objects and nearby walls. You should also be able to use the lamp comfortably without the shade obstructing the space.

Real examples from our lamp-base collection
These are starting points from our current product descriptions, rather than a rule for every lamp. The listed base measurements and your preferred shade height both affect the final balance.
Lamp base | Listed base size | Shade starting point |
Hyalos | 28cm high; 20cm wide | 25cm diameter |
Bora | 50cm high; 34cm wide | 40 or 45cm drum |
For a smaller lamp, our Mini Ondine description recommends a 20cm shade. Compare the Hyalos, Bora and Mini Ondine pages to see the shapes and their current options.
Check the fitting before you order
Size is only one part of the choice. Our empire and coolie shades use a duplex top ring; our drum shades use a utility fitting. Tell the Studio whether the shade is for a ceiling pendant or a table/floor lamp. If you are replacing a shade, photograph its existing metal fitting and check whether you already have a suitable carrier.
Use our illustrated fittings guide and five checks before replacing a lampshade if you are unsure about the ring, carrier, spider adaptor or harp arrangement.
Choose your fabric, then customise
The shade in a fabric preview is an example, not the only shape or size you can order. Choose a fabric from our handmade lampshade collection, then select the available shape, size, lining and fitting in the Lampshade Studio. The Studio shows the price for your chosen specification.
For an unusual size or an existing lamp you would like help with, contact Lucy & Chris with a photograph, the base measurements and the space available. We can advise on proportions and discuss a bespoke shade where a standard option does not suit.


Comments